Model No：PO111 ( black white/black/blue white )

1. OLED display
2. Low power signal
3. SpO2、PR、PR bar chart display, easy to track SpO2、PR change
4. Accurate and reliable - Accurately confirm SpO2, pulse rate and
pulse strength
5. PI: Perfusion Index
6. Rotatable Multidirectional Display
7. 8 seconds automatic shutdown after finger out, energy saving
8. Built-in soft and comfortable silicone finger mold, no pressing
fingertips, more accurate measurement

Specifications :

1. Display type:OLED display
2. SpO2
    Measurement range:70%～99%
    Accuracy :±2% on the stage of 70%～99%,Unspecified(≤70%)
    Resolution: ±1%
3. PR
    Measurement range :30BPM～240BPM
    Accuracy:±1BPM or ±1%
4. Power supply: two AAA 1.5V alkaline batteries
5. Power consumption: below 30mAh
6. Automatically power-off :The product automatically shuts off when no signal can be detected within 8 seconds.
7. Operation environment:Operation temperature : ＋5℃～40℃
                                          Storage temperature: -10℃～40℃
                                          Operation humidity :15%～80%
                                          Storage humidity : 10%～80%
                                          Air pressure:70kPa～106kPa
8. Declaration: EMC of this product comply with IEC60601-1-2 standard.
9. Measurement performance in low perfusion condition: required test equipment(BIO-TEK INDEX Pulse
    Oximeter Tester)could measure the available pulse waveform with the amplitude of 6% of the simulation
    pulse wave amplitude.
10.Interference resistance capacity against ambient light :device works normally when BIO-TEK INDEX
     Pulse Oximeter Tester exerts interfering signal test.
11.Product size:60mm*34mm*30mm
12.Packing size:55mm*80mm*40mm